UNPAINT is a removable architectural coating designed for indoor spaces that change frequently. Apply it by brush, roller or spray, then peel it away from a compatible, properly prepared surface.
For residential, commercial and creative interiors.
These posts illustrate the product; they are not projects carried out by ABC. Content belongs to its respective creators.
Built for spaces that change often
When colours, campaigns or sets change several times a year, UNPAINT offers a new way to plan those temporary transformations.
At home
An option to explore for personalizing an interior or changing a room’s look, on a compatible, properly prepared surface.
Retail and visual merchandising
Seasonal windows, launches, promotions and brand-colour display areas.
Events and experiential marketing
Temporary installations, brand activations and pop-ups dismantled after the event.
Booths and trade shows
Booths whose colours and branding change from one client to the next.
Film, television and advertising
Sets, studio walls, props and photo stages whose look changes regularly.
Property management
Rental spaces, common areas and commercial units that change tenants or themes.
What sets UNPAINT apart
Up to 12 months indoors
The technical data sheet allows for indoor use of up to 12 months, away from direct sunlight.
Designed to be peeled
A sufficiently even and thick application allows the coating to be removed as a film.
Professional application
Can be applied by brush, roller or with airless equipment.
Multiple possible surfaces
Walls, plywood, glass, metal, plastic, acrylic, concrete and other compatible surfaces. A prior test is required.
What to know before a project
How many coats are needed?
The technical data sheet generally recommends 2 to 3 even coats. An extra coat may be needed on certain base colours or surfaces. Too thin an application can make removal harder.
What is the drying time?
Allow roughly 30 to 60 minutes between coats and up to 24 hours for final curing, depending on application conditions.
Can it be applied to any surface?
No. The surface must be clean, dry, stable and properly prepared. A test in an inconspicuous area is recommended. Results may vary with porosity, colour, surface condition and number of coats.
Can the product leave a mark?
Some colours may slightly tint certain pale or porous surfaces. A compatibility test should be done before full application.
How long can it stay on a surface?
Up to 12 months in an indoor space without direct sun exposure, per the manufacturer's recommendations.
What is the approximate coverage?
Per the technical data sheet: roughly 128 to 170 sq ft per gallon over a similar colour, 106 to 149 sq ft over a different colour and 50 to 80 sq ft on a porous surface. Coverage varies with the surface, thickness and application method.
Performance depends on substrate preparation, site conditions, applied thickness and adherence to the manufacturer’s instructions.
How does it work?
01
Prepare
Clean, dry and check the compatibility of the surface.
02
Apply
Apply 2 to 3 even coats by brush, roller or spray.
03
Use
Enjoy the result for the duration of your campaign or installation.
04
Remove
Lift an edge and slowly peel away the film following the manufacturer's recommendations.
Does your space change regularly?
Tell us about your project. ABC Rénovations will help you determine whether UNPAINT is worth evaluating for your application.
